Multi Drug Doa Test 2/3/4/5/6/7/8/9/10 Panel Urine Test Drug Abuse Test

• Type: Disposable Medical Test
• Material: Plastic
• Ethylene Oxide Sterilization: Without Ethylene Oxide Sterilization
• Quality Guarantee Period: Two Years
• Group: Adult
• Logo Printing: With Logo Printing
• Model NO.: MDDT
• Specification: 3.0mm cassette
• Trademark: No
• Origin: China
• HS Code: 3822190090
• Production Capacity: 10000000000PCS/Year

Product Description

Product Description

 

Multiple Drugs of Abuse Rapid Tests

(Strip, Cassette, Dip card)

Packaging & Shipping

1.Packaging

1pc per inner aluminum foil bag, 
50/100 pcs per box(or per outer bag), 
1000/2000/5000pcs per carton

2.Shipping

1) Small order: By express, DHL/ UPS/ Fedex/ EMS etc.

2) Large order: By sea or By air

3) Choose the best and convinient way for your need

 

Test must be in room temperature (10oC to 30oC)

1. Open the sealed pouch by tearing along the notch. Remove the test device from the pouch.

2. Hold the one side of the device with one hand. Use the other hand to pull out the cap and

expose the absorbent end.

3. Immerse the absorbent end into the urine sample about 10 seconds. Make sure that the urine

level is not above the "MAX" line printed on the front of the device.

4. Lay the device flat on a clean, dry, non-absorbent surface.

5. Read the result at 5 minutes. Do not read after 5 minutes.

 

RESULTES

Negative: Two pink-colored bands appear, one in the control region and one in the test region. A negative result indicates free drug is absent from urine or at concentrations lower than the detection cut-off level of the test.

Positive: One pink-colored band appears in the control region with no apparent band appearing in the test region with no apparent band appearing in the test region. A positive result indicates free drug is present in urine at concentrations at or exceeding the detection cut-off level of the test.

Invalid: No band appears in the control region, or a pink-colored band appears in the test region only. An invalid test result may be due to improper assay procedures or damage to the device. With an invalid result, the specimen should be re-tested using a new test.

Note: The test band intensity may be weaker or stronger than that of the control band.